Warrior MCB-9XL Transmitters
U106.3.0
14
7. Once the MCB has completed its search
—and one or more receivers have been
found
—the
RF
and
A Selection
LEDs light steadily.
Note: If no receivers are available, the MCB will stay in scan mode either until it
times out or is turned off.
8. A detected receiver
’s Association LED indicator starts blinking, and the
Horn/Light relay sounds the horn (or lights the light) it is connected to. To select
this receiver, flip the
Select/Next
switch (
S07
)
UP
.
The
RF
LED starts blinking rapidly, indicating that communication is established.
The receiver identity (ID) is now stored in the MCB memory slot.
9. If the found receiver unit is
NOT
the receiver desired, press the
Select/Next
switch (
S07
)
DOWN
to scroll through the detected receivers until the desired
receiver is found.
(The receiver indicates its selection by blinking its Association LED and pulsing
the Horn/Light relay, sounding the horn or flashing the light.) Flip the
Select/Next
switch (
S07
)
UP
to select the receiver.
