Manual_CLASSIC_DE_EN_V4
Page 22 of 28
CertoClav Sterilizer GmbH
Peintner Strasse 10
A-4060 Leonding / Austria
Scope of delivery
After opening the packaging, please inspect the product for potential damages in transit. In case of
damaged goods please contact your dealer immediately and
DO NOT
operate the unit for safety reasons.
The following parts are delivered. Please check them carefully. Should one of these parts be missing,
please contact your dealer or call us directly.
The following parts are delivered with the autoclave, please check:
•
Autoclave Classic incl. chamber and lid
•
Manometer with gasket and nut
•
Steam release spigot, gasket and nut
•
Thermometer with gasket
•
Instrument tray with water level indicator
•
Power cable
•
User manual and warranty certificate
Additionally, we offer the following accessories:
•
Art. no. 1300149 wire basket with handle Ø 25 cm, stainless steel
•
Art. no. 8582020 condensation container (5L) and hose (1,0m)
•
Art. no. 8582016 hose (length 1,0m, Ø 10mm) for mounting on steam release spigot
•
Art. no. 1310186 service set 2 with all gaskets
•
Art. no. 8500482 Water distiller. We recommend using distilled water
For further information about our product range visit:
Setup
Autoclave
•
The setup is simple. Place the autoclave on a table or the floor to achieve a convenient working
height.
•
Unpack the manometer and the steam release spigot. Mount them on the lid by putting them
through the holes in the lid with the provided gaskets and fix with the provided nuts on the inside of
the lid.
•
We recommend mounting a hose on the steam release spigot, inner diameter 10 mm. (Art. no.
8582016)
•
Unpack the thermometer and put it in the thread straight and turn it carefully.
–
see assembly
instruction packed with the thermometer.
•
Plug in the power cable to the socket on the base.
