background image

PRODUCT DESCRIPTION

Hydraulic floor jacks are designed to lift, but not support, one end of a vehicle. Hydraulic floor 
jacks must be used in conjunction with a pair of appropriately-rated jack stands.

WARNING!

•  Read, study, and understand all warnings and operating instructions prior to use.
•  Do not overload this jack beyond the rated capacity.
•  This jack is designed for use only on hard, level surfaces capable of sustaining the load.
•  This is a lifting device only. The load must be supported immediately by jack stands.
•  Do not get under or allow anyone under the vehicle until it has been supported by jack stands.
•  Lift only on areas of the vehicle as specified by the vehicle manufacturer.
•  Centre load on saddle prior to lifting.
•  Some vehicles require an adaptor to properly engage the frame for lifting. Use vehicle 

manufacturer's instructions on proper lifting.

•  No alterations to the jack shall be made.
•  Only attachments, restraints, or adaptors supplied by the manufacturer shall be used.
•  Failure to heed these warnings may result in personal injury and/or property damage.

PRODUCT DESCRIPTION

4

5

 

PRODUCT DESCRIPTION

WARNING!

NEVER use an automotive jack as a stand-alone device. After lifting, immediately 
support the lifted load with a pair of appropriately-rated vehicle support stands.

To avoid crushing and related injuries:

•  Never work on, under, or around a load supported only by a hydraulic jack.
•  Read, understand and follow all printed materials provided with and on this jack.
•  Immediately support the lifted load with a pair of appropriately-rated jack stands.
•  Use ONLY on vehicles whose lift points are compatible with the saddle of this jack. 

Incompatibility may result in structural damage to the vehicle and/or jack.

•  Chock each un-lifted tire in both directions.
•  Be alert and sober when servicing a vehicle! Never operate this equipment when under the 

influence of drugs or alcohol.

•  DO NOT use this device to lift, level, lower, support, adjust or otherwise move a house, 

mobile home, travel trailer, camper, or building structure of any type, size or 
configuration.

WARNING

WARNING!

Be sure all tools and personnel are clear before lowering load. Only attachments 
and/or adaptors supplied by the manufacturer shall be used. Lift only on areas of 
the vehicle as specified by the vehicle manufacturer.

SAFETY INFORMATION

Save these instructions. For your safety, read, understand, and follow the information provided 
with and on this jack before using.
The owner and/or operator of this equipment must have an understanding of this jack and safe 
operating procedures before attempting to use. The owner and/or operator must be aware that 
the use and repair of this product may require special skills and knowledge. Instructions and 
safety information must be conveyed in the operator's native language before use of this jack is 
authorized. If any doubt exists as to the safe and proper use of this jack, remove from service 
immediately.

Inspect before each use. Do not use if broken, bent, cracked, or damaged parts (including labels) 
are noted. Any jack that appears damaged in any way, operates abnormally or is missing parts, 
must be removed from service immediately. If you suspect that the jack was subjected to a 
shock load (a load suddenly dropped upon it), immediately discontinue use until the jack has 
been checked by a factory authorized service centre (contact distributor or manufacturer for 
list of authorized service centres). It is recommended that an annual inspection be done by 
qualified personnel. Labels and owner's manuals are available from manufacturer.

model no. 299-7004-0  |  contact us 1-866.523.5218

Содержание 299-7004-0













Отзывы: