Maintenance and Servicing
To prevent serious injury or death from accidental operation, turn the Power
Switch of the tool to its “OFF” position and disconnect battery pack from tool
before performing any inspection, maintenance, or cleaning procedures.
•
Clean out dust and debris from vents and electrical contacts by blowing
with compressed air. Always wear safety goggles when cleaning tools
with compressed air.
•
Keep tool handles clean, dry and free of oil or grease.
•
Use only mild soap and a damp cloth to clean the tool, keeping away from
all electrical contacts.
Note
: Certain cleaning agents and solvents are harmful to plastics and other
insulated parts. Some of these include gasoline, turpentine, lacquer thinner,
paint thinner, chlorinated cleaning solvents, ammonia and household detergents
containing ammonia.
Tool maintenance must only be performed by qualified repair personnel. If the
tool is not working properly, do not attempt to repair it yourself. Contact the
Kogan customer support team.
Troubleshooting
Problem
Possible Causes
Likely Solutions
Tool will not start.
•
Battery pack not
installed properly.
•
Battery pack not
charged.
•
Check battery pack
installation.
•
Check battery pack
charging requirements.
Battery pack will
not charge.
•
Battery pack not
inserted into charger.
•
Charger not plugged
in.
•
Insert battery pack
into charger until red
LED appears.
•
Plug charger into a
working outlet. Refer
to “Important
Charging Notes” for
more details.
•
If chargers are daisy
chained together
check all connections.
•
Check current at
receptacle by plugging
in a lamp or other
appliance.
•
Check to see if
receptacle is
10
Содержание VDRILXACT
Страница 1: ......
