51
50
Classification
Form of electric shock protection
Degree of electric shock protection
Degree of protection from harmful invasion of water
Depending on the mode of operation
Continuous operation.
CLASS II EQUIPMENT
TYPE BF APPLIED PART.
Ordinary
1. Explanation of mark, delivery, and storage
Do not disassemble and contact the customer service center when problem occurs with a fuse.
* Pull the marked area to exchange the fuse (related to service engineer)
* The equipment has to be installed at place built protective device having appropriate breaking capacity so
that prospect short-circuit current do not exceed 40 A .
Capacity of a fuse : AC 250V, T10AL
Time-Lag,
10A,
Low breaking Capacity(Glass Body Fuse)
CERAGEM
The disposal of waste products / residues, etc.
V~ :
AC (alternating current) voltage source
ㅣ :
On (power: connectino to the mains)
O : Off (power: disconnection from the mains)
TYPE BF APPLIED PART
Serial number
Refer to instruction manual/booklet sign
General prohibition sign
Manufacturing date
Manufacturer
CLASS II EQUIPMENT
Fragile (handle with care)
Use no hooks
This way up
Keep dry
IP20
The product's IP classification
When 'waterproof cover' cover to the product
Catalogue number
Medical device
IP21
Transport and
storage ambient
temperature range
10%
95%
500hpa
1060hpa
Transport and
storage relative
humidity range
Transport and
storage atmospheric
pressure range
: UL Classification Mark
Medical –General Medical Equipment
E358148
AS TO ELECTRICAL SHOCK,
FIRE AND MECHANICAL HAZARDS ONLY IN ACCORDANCE WITH
(ANSI/AAMI ES60601-1 (2005)AMD 1(2012),
CAN/CSA C22.2 NO. 60601-1:14(2014), IEC 60601-1-11 (2015)
-68℉
140℉
a) An ambient temperature range of -20℃(-68℉) to +60℃(+140℉).
b) A relative humidity range of 10% to 95%.
c) An atmospheric pressure range of 500hPa to 1060hPa
Condition for Transport and Storage
a) An ambient temperature range of +10℃(+50℉) to +40℃(+104℉).
b) A relative humidity range of 30% to 75%.
c) An atmospheric pressure range of 700hPa to 1060hPa
Condition for Operation
Unique device identifier
Model number
KR
Country of manufacture
Guidance and manufacturer’s declaration
- electromagnetic emission
The Model CGM MB-1701(CERAGEM CO., LTD. Automatic Thermal Massager)is intended for use
in the electromagnetic environment specified below.The customer or the user of CGM MB-1701
should assure that it is used in such an environment.
Emission test
Compliance
Electromagnetic environment - guidance
RF emissions
CISPR 11
Group 1
The Model CGM MB-1701 uses RF energy
only for its internal function. Therefore. Its
RF emissions are very low and are not likely
to cause any interference in nearby electronic
equipment
Class B
Harmonics emission
IEC 61000-3-2
Voltage fluctuation
IEC 61000-3-3
A
Complies
The Model CGM MB-1701 is suitable for use
in all establishments, including domestic
establishments and those directly connected
to the public low-voltage power supply
network that supplies buildings used for
domestic purposes.
2. Attached documents
