Wait!
- When the product is paused and left the internal projector will move down vertically
in order to prevent injury. (When the mode is executed again, the set strength will be restored.)
- When 5 minutes have passed after pausing, the product will turn off automatically.
1. Turn on the remote control, check the current status, and press
the automatic mode button.
(mode and time in case of standard speed)
1. Turn on the remote control, check the current status,
and press the Intensive mode button.
- If you cancel the position setting by pressing the Intensive mode button
again, the internal projector will move.
- When 90 minutes have passed after setting the remote control,
the remote control will turn off automatically and the mode will end.
3. Using the remote control
3. Using the remote control
Using the automatic mode
Using the intensive mode
Approximately
90 minutes
Duration of mode
A
Sequential pressing
(Mode A, 1-16 are selected sequentially)
33
32
Mode A (Standard)
Approximately 36 minutes and 30 seconds.
Mode 1 (Special)
Mode 9 (Body line)
Approximately
36 minutes and 30 seconds.
Approximately
18 minutes
Mode 3 (Stable)
Approximately
36 minutes and 30 seconds.
Mode 5 (Basic health)
Approximately
36 minutesand 30 seconds.
Mode 7 (Study)
Approximately
36 minutes and 30 seconds.
Mode 12
(Meditation - Golf)
Approximately
36 minutes and 30seconds.
Mode 14
(Meditation - Relax)
Approximately
36 minutes and 30 seconds.
Approximately
75 minutes
Approximately
36 minutes and 30 seconds.
Approximately
36 minutes and 30 seconds.
Approximately
36 minutes and 30 seconds.
Approximately
36 minutes and 30 seconds.
Approximately
36 minutes and 30 seconds.
Approximately
18 minutes
Mode 16
(Meditation - Breathing)
Approximately
36 minutes and 30 seconds.
Mode 10 (Stretching)
Mode 2 (Relax)
Mode 4 (Circulation)
Mode 6 (Energy)
Mode 8 (Rest)
Mode 13
(Meditation - Golf)
Mode 15
(Meditation - Stable)
Mode 11 (Growth)
Approximately
36 minutes and 30 seconds.
* The duration of modes may vary according to the speed of the internal projector.
2. When scanning is completed, the intensive mode
will begin. Maintain proper body position.
- The time remaining will be displayed at the top of the human body icon.
3. To specify the area for intense massage, move the
internal projector by holding down on the up/down
button until the location is found.
Wait!
- When pausing, the internal projector will move down vertically in order to
prevent burns and injury.
(When the mode is executed again, the set strength will be restored.)
- When 5 minutes have passed after pausing, the product will turn off automatically.
* If you press and hold the Mode button, there will be a voice guide on the Mode A (Default) Massage.
3. Once scanning is completed, the massage program
will start. Please remain in the proper position.
- The time remaining will be displayed at the top of the human body icon.
- Massage mode can be chosen either by repeatedly pressing the automatic
mode button or by selecting the automatic mode button then toggling
between the up/down button while the mode display is highlighted in yellow.
- When the mode begins, the ceragem sound will commence.
(A sound source will not be played back while using the meditation mode.)
- The mode cannot be paused during scanning.
- The body type graph varies from person to person.
2. Cycle through the modes by repeatedly pressing the
automatic mode button until the desired massage
program is chosen. Scanning will begin. Remain in
the proper body position--supine and relaxed, lying on
your back, legs outstretched.
