Cepex CMC-08-24, Инструкция по установке и эксплуатации

Страница: 26 / 72

25
Programming controller for Individual valve -
Independent Program I
Starting Irrigation Cycle for Cyclic Programming
In this operation the time and day for starting cyclic irrigation of the selected valve
is set. The number of days before the first start must also be set. 0 DAYS - program
will start operation as of that day, 1 DAYS - program will start operation the following
day and so forth. Days preceding start of cycle irrigation may be up to 14 days. .
•
Turn selector to START mode (Independent Program I). STARTS I will appear on
display panel.
•
Press on . Hour digits will blink. Set the desired starting time using the and
as necessary.
•
Press on . Minute digits will blink. Set the desired minutes for the starting time
using and as necessary.
•
Press on until Number 0 and the word DAYS (or the last programmed number
of days in cycle) appear on display panel. Set number of days preceding start of
cycle with or as necessary.
To program additional valves in Independent Program I return to page 21 "Select
Valve" (Independent Program I).
RAIN
OFF
TEST /
RESET
TIME / DAY
RUN
MANUAL
PROGRAM
WEEKLY /
CYCLIC
START
VALVES
DURATION
VALVE
DURATION START
FERTILIZER
SENSOR
WATER
BUDGET
PROGRAM
A-B-C
INDEPENDENT
I
WEEKLY /
CYCLIC
START
4. Cyclic Irrigation Programming
In this operation the controller is programmed to operate the selected valve at set
cyclic times. The cycle can be set from one day up to 30 days.
Cycle Time Selection
• Turn selector to WEEKLY/CYCLE (mode Independent Program I)
• Press on until symbol and DAYS 1 appears, meaning, the cycle is 1 day.
• Press on . 1 blinks.
• Set cycle time using or as necessary up to 30 DAYS.
The selector should be returned to the TIME/DAY mode
following modification or ending of the program. EN