Cepex CMC-08-24, Инструкция по установке и эксплуатации

Страница: 19 / 72

18
Programming of valve-group irrigation
2. Cyclic Irrigation Programming
The controller is programmed to operate the selected program at set cyclic times.
The cycle can be set from one day up to 30 days. The cyclic time will be identical
for all of the valves attributed to the selected program.
Cycle Time Selection
•
Turn selector to WEEKLY / CYCLIC mode (in Programs A, B and C)
•
Press on until symbol and DAYS 1 appear (Irrigation cycle of 1 day).
•
Press on . DAYS 1 blinks.
•
Set cycle time using or as necessary up to DAYS 30.
Starting Irrigation Cycle for Cyclic Programming
In this operation the time and day for starting cyclic irrigation of the first valve is set
(in cyclic programming there is only one start time). All of the valves attributed to
the designated program will open in sequential order. As the first valve closes, the
second will open and so forth.
The number of days preceding the start of the program must be set. 0 DAYS -
irrigation will start as of that day, 1 DAYS - irrigation will start the following day and
so forth. Days preceding start of cycle irrigation may be up to 14 days. .
•
Turn selector to START mode (Programs A, B and C). STARTS I, and the last
displayedstarting time or OFF will appear on display panel.
•
Press on . Hour digits will blink. Set the desired starting time using the and
as necessary.
•
Press on . Minute digits will blink. Set the desired minutes for the starting time
using the and as necessary.
•
Press on until the number 1 and the word DAYS appear on display panel. Set
number of days preceding start of cycle with or as necessary.
The selector should be returned to the TIME/DAY mode
following modification or ending of the program.
EN