CenturyLink c1100t, Руководство по установке

Страница: 6 / 7

Overloading
Do not overload mains supply socket outlets and extension cords as this increases the risk of fire or
electric shock.
Telephone cable
USB
The device is to be connected to an identified USB port complying with the requirements of a Limited
Power Source.
Servicing
To reduce the risk of electric shock, do not disassemble this product. None of its internal parts are user-
replaceable; therefore, there is no reason to access the interior. Opening or removing covers may
expose you to dangerous voltages. Incorrect reassembly could cause electric shock if the appliance is
subsequently used.
If service or repair work is required, take it to a qualified service dealer.
Damage requiring service
Unplug this product from the wall outlet and refer servicing to qualified service personnel under the
following conditions:

When the power supply or its plug are damaged.

When the attached cords are damaged or frayed.

If liquid has been spilled into the product.

If the product has been exposed to rain or water.

If the product does not operate normally.

If the product has been dropped or damaged in any way.

There are noticeable signs of overheating.

If the product exhibits a distinct change in performance.
Immediately disconnect the product if you notice it giving off a smell of burning or smoke. Under no
circumstances must you open the equipment yourself; you run the risk of electrocution.
Regulatory Information
You must install and use this device in strict accordance with the manufacturer's instructions as
described in the user documentation that is included with your product.
Before you start installation or use of this product, carefully read the contents of this document for
device specific constraints or rules that may apply in the country where you want to use this product.
In some situations or environments, the use of wireless devices may be restricted by the proprietor of
the building or responsible representatives of the organization.
If you are uncertain of the policy that applies on the use of wireless equipment in a specific organization
or environment (e.g. airports), you are encouraged to ask for authorization to use this device prior to
turning on the equipment.
Technicolor is not responsible for any radio or television interference caused by unauthorized
modification of the device, or the substitution or attachment of connecting cables and equipment other
than specified by Technicolor. The correction of interference caused by such unauthorized
modification, substitution or attachment will be the responsibility of the user.
Technicolor and its authorized resellers or distributors are not liable for any damage or violation of
government regulations that may arise from failing to comply with these guidelines.
Important safety instructions

If applicable, the coaxial cable screen shield needs to be connected to the Earth at the building
entrance per ANSI/NFPA 70, the National Electrical Code (NEC), in particular section 820.93,
”Grounding of Outer Conductive Shield of a Coaxial Cable”, or in accordance with local regulation.

Leave 5 to 8 cm (2 to 3 inches) around the product to ensure proper ventilation to it.

Never push objects through the openings in this product.
!
CAUTION
To reduce the risk of fire, use only No 26 AWG wire size or larger telecommunication line cord.