CenturyLink c1100t, Руководство по установке

Страница: 5 / 7

SAFETY INSTRUCTIONS AND REGULATORY NOTICES
BEFORE YOU START INSTALLATION OR USE OF THIS PRODUCT, CAREFULLY READ
THESE INSTRUCTIONS
Modifications
The FCC requires the user to be notified that any changes or modifications made to this device that
are not expressly approved by Technicolor, may void the user's authority to operate the equipment.
Safety Instructions
Climatic conditions
This product:

Is intended for in-house stationary desktop use; the maximum ambient temperature may not exceed
40°C (104°F).

Must not be mounted in a location exposed to direct or excessive solar and/or heat radiation.

Must not be exposed to heat trap conditions and must not be subjected to water or condensation.

Must be installed in a Pollution Degree 2 environment (environment where there is no pollution or
only dry, nonconductive pollution).
Cleaning
Unplug this product from the wall socket and computer before cleaning. Do not use liquid cleaners or
aerosol cleaners. Use a damp cloth for cleaning.
Water and moisture
Do not use this product near water, for example near a bathtub, washbowl, kitchen sink, laundry tub, in a
wet basement or near a swimming pool. Transition of the product from a cold environment to a hot one
may cause condensation on some of its internal parts. Allow it to dry by itself before re-starting the
product.
Interface classifications
The external interfaces of the product are classified as follows:

Line, DSL: TNV circuit, subjected to over voltages (TNV-3)

Phone: TNV circuit, subjected to over voltages (TNV-3)

VoIP, FXS: TNV circuit, not subjected to over voltages (TNV-2)

HPNA, Cable: TNV circuit subject to overvoltages (TNV-1)

All other interface ports (e.g. Ethernet, USB, etc.), including the low voltage power input from the
AC mains power supply: SELV circuits.
Electrical powering
The powering of the product must adhere to the power specifications indicated on the marking labels.
This product is intended to be supplied by a Listed Direct Plug-in, or Desktop Power Unit marked
"Class 2" and rated as indicated on the label on your product.
The use of other types of supplies is prohibited. If you are not sure of the type of power supply needed,
consult the product's user documentation or contact your local product dealer.
Accessibility
The Direct Plug-in power supply, or the plug on the power supply cord serves as disconnect device. Be
sure that the power socket outlet you plug the power supply into is easily accessible and located as
close to the equipment as possible.
!
When using this product, always follow the basic safety precautions to reduce the risk of fire,
electric shock and injury to persons, including the following:

Always install the product as described in the documentation that is included with your
product.

Avoid using this product during an electrical storm. There may be a remote risk of electric
shock from lightning.

Do not use this product to report a gas leak in the vicinity of the leak.