Building Instructions for Ninja Pro
Building Instructions for Ninja Pro
Helicopter Kit
Helicopter Kit
Congratulations you have just purchased the finest 30-46 size RC helicopter model on the market. The Ninja
Pro and Pro Master series of helicopters feature cutting edge design along with state of the art materials used
throughout. Modern composite G-10 is used for the side frames for strength and to minimize vibration. An all
metal swashplate, metal washout and metal main rotor head are used to give precise control and handling
characteristics. Your Ninja Pro has been carefully researched and developed to give the highest performance
level achievable with present technology. We are constantly reevaluating our line of kits as technology ad-
vances in order to give you the highest degree of performance at all times. The instruction manual is divided
into twenty sections.. The parts bags have also been separated into eleven different numbered bags. The bags
should be opened in their numbered sequence with the exception of bag # eight as this is the hardware bag
and will be used in all steps.
Explanation:
* This instruction is written for 4 types of Ninja series, Ninja Pro 30,
Ninja Pro 46, Ninja Pro 30 Master and Ninja Pro 46 Master.
* Use locktite at the point where this mark is shown.
* Use oil at the point where this mark is shown.
* Special attention at the point where this mark is shown caution !
OPERATE YOUR NINJA PRO HELICOPTER SAFELY
Your new Ninja Pro helicopter is state of the are using proven design techniques and the best materials
available. This is done for two reasons, first to give you the highest quality helicopter available and second,
to insure it’s SAFE operation. It is imperative that the instructions be followed carefully during construction.
This will insure that your Ninja Pro is properly assembled and safe to operate. We are not responsible for
any damages or injuries caused by improper building, careless flying practices or the use of non-
factory parts. We can not stress the importance of using ONLY factory replacement parts for your Ninja Pro.
Every part in your Ninja Pro Kit has been thoroughly tested and made from the best materials. After market
parts may substandard and will compromise the safety of yourself and others at flying field. While flying,
always do so away from any obstacles. This includes trees, power lines, animals, people...... in the other
words, ANYTHING that can be hit if your model should go out of control. It is strongly recommended that
you NEVER go flying alone, a second person can warn you if anything comes into your flying area.
2
2
2
2
2
