Centrosolar TFP 288 Professional, Руководство по установке

Страница: 12 / 16

7 Technical Specifications
Electrical Parameters
Module type TFP 288 Professional
Rated Power (P
MPP
) 144 Wp
Voltage (U
MPP
) 33 V
Current (I
MPP
) 4.36 A
Open Circuit Voltage (U
OC
) 46.2 V
Short Circuit Current (I
SC
) 5.3 A
Coefficient of Performance (∆P
MMP
) -0.3 W/K
Coefficient of Voltage (∆U
MMP
) -102 mV/K
Coefficient of Current (∆I
MMP
) 4.36 mA/K
Coefficient of Voltage (∆U
OC
) -176 mV/K
Coefficient of Current (∆I
SC
) 5.3 mA/K
NOCT 46 °C
According to standard test conditions STC (1,000 W/m², spectrum AM 1.5, cell temperature 25 °C). The following max. deviations occur during the first 8 to 10 weeks. Power PMPP +15%, Voltage Uoc +11%, Current Isc +4%.
* Electrical specific values refer one sub module. The product consists of two separately connectible sub modules.
Weights and Dimensions
Length 5586 mm
Width 867 mm
Weight 44 kg
Laying pattern diagonal laying mm
Quality Features
Performance tolerance ±5%
Power output warranty** 10 years at 92% nominal output, 20 years at 84% nominal output, 25 years at 80% nominal output
Product warranty** 5 years
Max. system voltage 1000 V
** According to stipulation of Centrosolar AG Warranty conditions (incl. product and performance warranty). The performance guarantees stated in this document are only valid if the installation has
been registered at www.uni-solar.com.
Design features
Cells Amorphous Silicon Triple Junction Cells
Construction Foil laminate on coated steel sheet
Front side Highly transparent ETFE fluoropolymer
Rear side Coated Prelaq Nova steel sheet
Junction box Protection class IP 65
Bypass diodes Integrated bypass diodes
Connecting lead 2 x 0.5 m, connector system
System application Trapezoidal profile roofs
Technical changes and errors reserved - as of 08/2010
IEC 61646
IEC 61730
Submodule 1 (144 Wp)
Submodule 2 (144 Wp)
5586 ± 2
867 ±
2
Protection Class II
12
Installation Guide