Centrometal CentroPelet ZV 20, Технические инструкции

Страница: 19 / 28

GB
Maintenance and cleaning
The thermostove requires a simple and thorough cleaning
in order to ensure a more efficient performance and
smooth operation.
While cleaning the inside of the thermostove, to prevent
the escape of ashes, you can start the fan flue exhaust.
To enable this feature, you must press the button
and
then .
The display shows “
P U L S T U F
” (cleaning thermostove).
To stop the fan, simply press and hold the button or wait
for completion of a cleaning cycle (255 seconds).
Clean the grate using the appropriate tool from the ash
and any incrustation which could obstruct the passage
of air. In the case of depletion of pellets in the tank may
accumulate unburned pellets in the burn pot.
Always empty the residuals from the grate before each
start. Remember that only a brazier located and clean
properly can ensure ignition and optimal operation of your
thermostove. When positioning the crucible, carefully
check that the ends of the pads completely adhere to
their home and that the hole with pipe dedicated to the
passage of the resistance.
There should be no residual combustion in the contact
zone between the edges of the crucible and the support
surface on the door crucible.
Parts Everyday
Every 2-3
days
Every
week
Every 15
days
Every 30
days
Every 60-
90 days
Every 1
year
Brazier ◊
Cleaning the ash collection
compartment with suction device
◊
Cleaning ash tray ◊
Cleaning the door and glass ◊
Exchanger (turbulators) ◊
Cleaning the interior heat exchanger /
smoke fan compartment
◊
Cleaning complete exchanger
•
Clean "T" to exhaust •
Flue •
Door gasket ash •
Internal parts •
Flue pipe
•
Circulation pump •
Plate heat exchanger •
Hydraulic components
•
Electromechanical components •
◊ by the user
•
by the authorised qualified technical assistance
BY ThE USER
Daily control
All cleaning of all parts must be carried out with the stove completely cold and unplugged to
avoid burns and thermal shock. The stove does not need much maintenance if used with certified
quality pellet. The need for maintenance varies depending on the conditions of use (switching on
and off repeatedly) and depending on the performance required.
The decreased or absent cleaning can
cause misfire and cause damage to the
thermostove and the environment (possi-
ble emissions of soot and unburned). Do not pour
the pellets may be present in the brazier to misfire.