GB
UT01: Heating timer-thermostat enabling and disa-
bling and current hour setting.
This parameter is used to set the current day of the week
or to deactivate the set programming.
Press buttons
and
to select the desired value as
shown in the following table:
Example:
if today is Thursday, select “
Day 4
”; but select “
OFF
” to
start the pellet boiler stove manually (without program-
ming) so that the heating timer-thermostat is disabled.
Press button
to go to the following parameter.
UT02: Current hour setting
This parameter is used to set the current hour, press
buttons
and
to select the current hour.
Press button
to go to the following parameter.
UT03: Current minutes setting
Press buttons
and
to adjust current minutes.
Press buttons
to go to the following parameter.
UT04: Technical parameters setting
Press button
to go to the following parameter.
UT05: Thermostove first start-up time adjustment
This parameter indicates the time at which the pellet boiler
stove will be started: use buttons
and
to set the
desired time, with 10-minute steps.
Press button
to go to the following parameter.
UT06: Thermostove shutdown time adjustment
This parameter indicates the time at which the pellet boiler
stove will be turned off: use buttons
and
to set
the desired time, with 10-minute steps.
Press button
to go to the following parameter.
Upper
display
MEANING
Day 1
Monday
Day 2
Tuesday
Day 3
Wednesday
Day 4
Thursday
Day 5
Friday
Day 6
Saturday
Day 7
Sunday
OFF
Heating timer-thermostat disabled
UT07:
Week day selection
Press button
o select the days of the week. Press
button
to enable (ON) or disable (OFF) the pellet boiler
stove start-up day as shown in the following table
:
Upper
display
MEANING
Lower
display
Day 1
Monday
ON1/OFF1-Si o No
Day 2
Tuesday
ON2/OFF2-Si o No
Day 3
Wednesday
ON3/OFF3-Si o No
Day 4
Thursday
ON4/OFF4-Si o No
Day 5
Friday
ON5/OFF5-Si o No
Day 6
Saturday
ON6/OFF6-Si o No
Day 7
Sunday
ON7/OFF7-Si o No
In the following example, the pellet boiler stove is only
started on Saturdays and Sundays.
Day 1
Monday
Day 2
Tuesday
Day 3
Wednesday
Day 4
Thursday
Day 5
Friday
Day 6
Saturday
Day 7
Sunday
off 1
off 2
off 3
off 4
off 5
on 6
on 7
Confirm and continue with key
.
UT08 UT16
continue as indicated above to set the second, third and
fourth ignition times.
If the stove is controlled by an external thermostat,
when the thermostat reaches the preset temperature,
“
E C o T E R M
” will be shown on the pellet boiler stove dis-
play.
Domestic hot water kit (optional)
Thanks to an optional kit, pellet boiler stoves can also pro-
duce continuous domestic hot water healthy, safely and
automatically, without the need for water storing.
Domestic water pressure should not exceed 2 bars.
There is anyway an electronic control limiting the
system pressure to a max. value of 2,3 bar.
It is advisable to limit domestic water flow rate to approx.
8÷12 litres per minute in order to obtain a ΔT of approxi-
mately 25ºC.
The room temperature thermostat does
not turn off and on the pellet boiler stove;
it sets the stove in saving mode.
Содержание CentroPelet ZV 20
Страница 27: ...GB...
