12.0 FILE
Pressing this option will open a menu with: - LOAD FACTORY - SAVE
- LOAD SERVICE - LOAD
12.1 LOAD FACTORY
12.2 SAVE
12.3 LOAD
After pressing ''LOAD FACTORY'' you will see a message ''Load FACTORY settings?''. Pressing
button ''OK'' will load the default settings of regulation.
IMPORTANT: All settings will return to the
factory settings.
Pressing the'' BACK'' will return to the previous menu.
After pressing the "LOAD" button, the screen will display 3 memory from which the settings saved by
the user or service provider can be loaded. Pressing one of the 3 offered buttons will display the
message "Load saved settings?" On the screen. Pressing the "OK" button will save the saved
controller settings (which you saved with the "SAVE" button). Pressing the ''BACK'' will return to the
previous menu.
After pressing the "SAVE" button, 3 memory locations will be displayed on the screen (Memory 1, 2,
3). Pressing one of the three offered buttons will display the message "Save current settings?" On the
screen. Pressing the "OK" button will save the current controller settings. Pressing the ''BACK'' will
return to the previous menu.
12.* LOAD SERVICE
After pressing the "Load Service" button, the message "Load serviceman settings?" Will appear.
Pressing the "OK" button will load the settings saved by the service technician in the "Installation"
service menu.
IMPORTANT: All settings will return to the service settings.
Pressing the'' BACK''
will return to the previous menu.
13. INSTALLATION
This option can only be used by authorized persons. To enter the installation menu, you
must enter a password (PIN).
14. CM2K
This option is only visible if it is activated in "Installation menu" Access to the Installation
menu has only authorized person (by entering PIN)". For more informations about this
menu see ”CM2K Technical instructions for BioTec Plus boiler“.
File, installation, CM2K
Technical instructions CONTROL UNIT
BioTec Plus
49