9. DATE & TIME
This option is used to set the date and time. This option is used to set the date and time. It
is necessary for starting times, and the recording of errors / warnings (for the occurrence
of errors / warnings, remembers the date and time of occurrence). After setting the date
and time it is necessary to press the ''CONFIRM'' for saving date and time. If there is a
significant clock delay or clock setting at 00:00 or the date on 1.1.2000. It is necessary to
replace the battery on the back of the display (battery type CR 1220).
10. INFO
Menu with general information:
- Statistics
- Software version (boiler power, WiFi ID...)
11.0 DISPLAY
- Screensaver
- Language selection
- Init. message time
Possible selection:
Minimum: 10 seconds, Maksimum: 3600 seconds;
Factory:
600 seconds
If at some time nothing was pressed on the screen, the screensaver will turn on, to prevent damage
on the screen. Once you touch the screen, the screensaver will turn OFF.
11.1 SCREENSAVER
Possible selection:
ON / OFF;
Factory:
ON
This option enables or disables screen with the choice of language regulation when you turn-on main
switch. If is marked ''OFF'', after turning-on the main switch, it will be set on before selected language
and after some time, display will show the work display of the boiler (duration of this screen can be
adjusted in Section 11.3.).
Possible selection:
Minimum: 0 seconds Maximum: 20 seconds;
Factory:
5 seconds
This option is used to set the desired duration of the initial message after turning on the main switch.
This option is only available if the option ''LANGUAGE SELECTION'' (point 11.2.) is set to ''OFF''.
11.2 LANGUAGE SELECTION
11.3 INIT. MESSAGE TIME
- Sound volume
- Sound type
- Sound
Possible selection:
OFF, volume 1, volume 2, volume 3;
Factory:
Volume 3
This option is used to set speaker volume.
11.4 SOUND VOLUME
Possible selection:
Type 1, Type 2, Type 3, Type 4, Type 5, Type 6, Type 7, Type 8, Type 9,
Type 10;
Factory:
Type 3
This option is used to adjust type of speaker sound. It is possible to choose between 10 different types
of sounds.
11.5 SOUND TYPE
Possible selection:
Display, ERRORS, WARNINGS;
Factory:
Display, ERRORS, WARNINGS
This option is used to turn ON / OFF the control sound for Display, ERRORS, WARNINGS
11.6 SOUND
Date & time, info, display
Technical instructions CONTROL UNIT
BioTec Plus
48