Trouble Shooting
No Sound
- Ensure the AC adaptor is fully inserted into the AC outlet
and the power connection input on the transmitter.
- Ensure the speaker switch is ON.
- Speaker’s battery capacity is too low, replace with new
batteries or connect the AC adaptors to the speakers.
- Ensure the TV or audio component is ON.
- The connected audio / video equipment is not playing.
Start playing the equipment.
- The volume of speaker is too low, adjust the volume
to an appropriate level.
Distorted
- Press the AUTO SCAN button on the speakers or remote
control unit until the frequency of the transmitter matches.
- Change the position of the channel selector on the transmitter.
You must then press the AUTO SCAN button on the speaker.
- Battery capacity is too low. Replace with the new battery.
- Ensure the volume level of speakers is adjusted properly.
- The speaker is too far from transmitter, move closer.
- The input level of the audio signal is too low. Turn up the
volume of the audio source equipment.
Specifications
Transmission
UHF stereo
Carrier Frequency
900 MHz (CH-1: 912.00 MHz /
CH-2: 913.00 MHz)
Operation Voltage
Transmitter, DC 12V 200mA
Speaker, 6 x “AA” size Alkaline
batteries (not included) or DC
12V 600mA adapter
Remote Control Unit, 2 x “AAA”
size batteries (not included)
Frequency Response
50Hz - 12kHz
S/N Ratio
70dB
Channel Separation
60dB
Operation Distance
Up to 50M (Open Area)
Output Power
2 x 2.0W (RMS)
Warning
Changes or modifications to this unit not expressly approved by the party responsible for compliance
could void the user’s authority to operate the equipment. Operation is subject to the following two
6
