3. Plug the AC power adapter
in the DC jack located on the
rear of the transmitter.
4. The rear of the transmitter has one audio cord that can be connected to audio output jack of a
TV, Monitor, VCR, Radio, CD/MP3/VCD/DVD player or to a headphone/earphone jack with the
connector provided.
5. Plug the adapter into the AC source and the
blue POWER LED will illuminate. If the blue
POWER LED does not illuminate,
make sure the adaptor is plugged in properly.
Speaker Receiver
1. Insert 6 ‘AA’ size ALKALINE batteries (not included) into the battery compartment with correct
polarity at the rear of the speaker or connect the 12V power adaptor to the DC input jack on the rear
of each speaker, then plug it to the wall AC outlet.
Installation
3/8 jack
2
