Installation
3. Press the + / - (volume level) button on the speaker and adjust the volume
to the desired listening level.
4. Push the “AUTO SCAN” button on the speaker or Remote Control to get the best tuning reception.
When the button is pressed, frequency tuning starts automatically and it stops when a signal is
detected. A) Keep a distance from the speaker up to 7 meters apart from the transmitter, and then
press the “AUTO SCAN” button for the best tuning reception.
B) Whenever you find a frequency jam, move your channel switch from one channel to
the other channel (there are two channels for this selection) on the transmitter,
and then press the “Auto Scan” button again.
4
