Multi-Line Phones
E1 E2 E3 E4
TalkSwitch Jacks
Incoming
Phone Lines
Extensions 111, 112, 113, & 114
4 Line Phone
Line Splitter
Line Splitter
Call Handling:
TalkSwitch extensions 111, 112, 113, and 114 are all
wired to the four line phone. When a call is
transferred to extension 111, line 1 on the phone
will show as active; similarly calls on extension 112
will show line 2 as active etc.
Through the software, you may configure each
incoming line to ring any given number of
extensions, including all the extensions. However,
be careful
if incoming line 1 is configured to ring
extensions 111,112,113 and 114. An incoming call
will ring all four phone lines (lines 1 through 4) at
the same time. Instead configure incoming line 1 to
ring extension 111, line 2 to ring extension 112, etc.
Wiring Diagram
Phone Wiring
TM
Connecting Phones
Quick Guide
copyright centrepoint technologies inc. 2002
www.talkswitch.com
Ext 114
to Jack E4
Ext 113
to Jack E3
Ext 112
to Jack E2
Ext 111
to Jack E1
“To Tel. Line L1 / L2”
“To Tel. Line L3 / L4”
RJ-11 Coupler
2 line (4 pin) female
to female connector
RJ-11 Cord
2 line (4 wire) male
to male connector
Line Splitter
L1 and L2 are single line (2 pin)
female connectors that join to a
two line (4 pin) male connector.
A 4 pin female receptical will
indicate that you have a duplexer
and not a line splitter.
Male (4 pin)
L1 (2 pin)
L1 (2 pin)
Line Splitter
Connector
