Page 8
SKU 97080
For technical questions, please call 1-800-444-3353.
hOSE CONNECtION
tO PREVENt ExPLOSION: use only clean, dry, regulated, compressed
air to power this tool. do not use oxygen, carbon dioxide, combustible
gases, or any other bottled gas as a power source for this tool.
tool
Air
Compressor
Quick
Coupler
Air hose
on Reel
Filter
Regulator with
Pressure Gauge
Male
Connector
Male
Connector
Valve
Quick
Coupler
Recommended Air Line Components
Oiler
1.
Incorporate an in-line oiler, shut-off valve, regulator with pressure gauge, and filter
for best service, as shown in the diagram above.
An in-line shutoff valve is an
important safety device because it controls the air supply even if the air hose
is ruptured.
Note:
If an automatic oiler system is not used, add a few drops of Pneumatic Tool Oil to
the airline connection before operation. Add a few more drops after each hour of
continual use.
Attach an air hose to the compressor’s air outlet. Connect the air hose to the air
2.
inlet of the tool.
Other components, such as a connector and quick coupler, will make operation
3.
more efficient, but are not required.
WARNING! tO PREVENt SERIOuS INjuRY FROM ACCIdENtAL OPERAtION:
do not install a female quick coupler on the tool.
Such a coupler contains an
air valve that will allow the air tool to retain pressure and operate accidentally after
the air supply is disconnected.
WARNING
REV 07k
