Page 6
SKU 96382
for technical questions, please call 1-800-444-3353.
to clean the spray Gun:
caution: do this procedure in a well ventilated area, away from flames.
Remove Spray Gun from air supply.
Remove the Paint Cup (30) from the Spray Gun.
Remove cup cover and pour any left-over paint into the paint container and seal it.
Pour nonflammable thinner or solvent into the Paint Cup, or if water-based paint was
used, add water. Replace Lid.
Reattach the Paint Cup to the Spray Gun and shake the liquid inside vigorously.
Turn on the Air Supply and spray the liquid into a waste bucket.
Repeat this procedure until the spray output is free of paint.
Dispose of the waste solvent or thinner in a manner consistent with State, Local, and
Federal regulations for the disposal of such waste materials.
caution:
Materials used when painting or cleaning may be harmful or fatal if inhaled or swal-
lowed. Use only in an area with adequate ventilation. Use a respirator or mask when
painting or using cleaning solvents. Do not use around flames.
1.
2.
3.
4.
5.
6.
7.
8.
please read tHe followinG carefully
THe MANUFACTUReR AND/OR DISTRIBUTOR HAS PROVIDeD THe PARTS LIST AND ASSeM-
BLY DIAGRAM IN THIS MANUAL AS A ReFeReNCe TOOL ONLY. NeITHeR THe MANUFACTUReR
OR DISTRIBUTOR MAKeS ANY RePReSeNTATION OR WARRANTY OF ANY KIND TO THe BUYeR
THAT He OR SHe IS QUALIFIeD TO MAKe ANY RePAIRS TO THe PRODUCT, OR THAT He OR
SHe IS QUALIFIeD TO RePLACe ANY PARTS OF THe PRODUCT. IN FACT, THe MANUFACTUReR
AND/OR DISTRIBUTOR exPReSSLY STATeS THAT ALL RePAIRS AND PARTS RePLACeMeNTS
SHOULD Be UNDeRTAKeN BY CeRTIFIeD AND LICeNSeD TeCHNICIANS, AND NOT BY THe
BUYeR. THe BUYeR ASSUMeS ALL RISK AND LIABILITY ARISING OUT OF HIS OR HeR RePAIRS
TO THe ORIGINAL PRODUCT OR RePLACeMeNT PARTS THeReTO, OR ARISING OUT OF HIS
OR HeR INSTALLATION OF RePLACeMeNT PARTS THeReTO.
