Page 11
SKU 41209
For technical questions, please call 1-800-444-3353.
Clearing Jams
1.
Occasionally a nail may become jammed in the firing mechanism of the Roofing
Nailer, making the tool inoperable.
2.
To remove a jammed nail,
disconnect the Roofing Nailer from its compressed air
supply. Empty the Magazine (92) completely of nails. Attempt to fire the Roofing
Nailer into a piece of scrap wood to ensure it is disconnected and is incapable of
firing any nails.
3.
Use a pair of needle nose pliers (not included) to remove the jammed nail (usu-
ally from the Feed Pawl (61) area). Replace the coil of nails into the Roofing
Nailer. Close the Magazine Cover (101) and Door (80) securely. Then, recon-
nect the air supply hose to the tool.
Anytime
any maintenance or repairs are done (including clearing jams),
FIRST:
1.
Disconnect the Nailer from the air hose.
2.
Empty the
Magazine (92)
completely.
3.
Attempt to fire the Nailer into a piece of scrap wood to ensure that it is discon-
nected and is incapable of firing any nails.
Anytime
any maintenance or repairs are done, FIRST:
1.
Disconnect the Nailer from the air hose.
2.
Empty the
Magazine (92)
completely.
3.
Attempt to fire the Nailer into a piece of scrap wood to ensure that it is discon-
nected and is incapable of firing any nails.
Inspection, Maintenance, and Cleaning
1.
Inspect the Nailer frequently and lubricate periodically with Pneumatic tool oil,
then wipe dry.
Do not use detergent oil or additives as these lubricants will cause accelerated
wear to the internal seals.
