Page 5
SKU 41209
For technical questions, please call 1-800-444-3353.
26.
Stay within air pressure capacity.
Never operate the Nailer above 100 PSI.
27.
Hold tool away from head and body.
During operation the Nailer may kick
back causing injury.
28.
Transport Nailer safely.
Always disconnect air supply when moving the tool in
the workplace. Carry the tool by the handle to avoid contact with the trigger.
29.
Avoid working alone.
If an accident happens, an assistant can bring help.
Note:
Performance of the compressor (if powered by line voltage) may vary depending
on variations in local line voltage. Extension cord usage may also affect the tool
performance.
sonal injury. Never fire the Nailer into the air, or point it toward yourself or an-
other person. Always wear ANSI approved safety goggles during use, mainte-
nance, and reloading.
24.
Do not fire fasteners too close to the edge of a workpiece.
They may split
the workpiece and fly free, causing personal injury.
25.
Take caution, as some woods contain preservatives such as copper chro-
mium arsenate (CCA) which can be toxic.
When stapling or nailing these
materials extra care should be taken to avoid inhalation and minimize skin con-
tact.
WARNING: Some dust created by power sanding, sawing, grinding, drilling, and
other construction activities contain chemicals known (to the State of Cali-
fornia) to cause cancer, birth defects, or other reproductive harm.
Some examples of these chemicals are:
* Lead from lead-based paints
* Crystalline silica from bricks and cement and other masonry products
* Arsenic and chromium from chemically treated lumber.
(California Health & Safety Code 25249.5, et seq.)
Warning: The warnings, cautions, and instructions discussed in this instruction
manual cannot cover all possible conditions and situations that may occur. It
must be understood by the operator that common sense and caution are factors
which cannot be built into this product, but must be supplied by the operator.
