Page 3
SKU 41209
For technical questions, please call 1-800-444-3353.
ment to do the work of a larger industrial tool. There are certain applications for
which this tool was designed. It will do the job better and more safely at the rate
for which it was intended. Do not modify this tool and do not use this tool for a
purpose for which it was not intended.
6.
Dress properly.
Do not wear loose clothing or jewelry as they can be caught in
moving parts. Protective, electrically non-conductive clothes and non-skid foot
wear are recommended when working. Wear restrictive hair covering to contain
long hair.
7.
Do not overreach.
Keep proper footing and balance at all times. Do not reach
over or across running machines or air hoses.
8.
Use eye and ear protection.
Always wear ANSI approved impact safety
goggles and appropriate hearing protection. Wear a full face shield if you
are producing metal filings or wood chips. Wear an ANSI approved dust
mask or respirator when working around metal, wood, and chemical dusts
and mists. Other people in the work area must also wear ANSI approved
impact safety goggles.
9.
Maintain tools with care.
Keep tools clean for better and safer performance.
Follow instructions for lubricating and changing accessories. Inspect tool cords
and air hoses periodically and, if damaged, have them repaired by an authorized
technician. The handle must be kept clean, dry, and free from oil and grease at
all times. Do not operate a tool if any portion of the tool’s operating controls are
inoperable, disconnected, altered or not working properly.
10.
Disconnect Air Hose and release any built-up air pressure.
Never perform
service on the Nailer, clear jams, or disassemble with the air hose attached.
Always release any built-up air even after disconnecting hose. Disconnect the
Nailer when not in use.
11.
Remove adjusting keys and wrenches.
Check that keys and adjusting
wrenches are removed from the tool or machine work surface before attaching to
an air source.
12.
Avoid unintentional starting.
Be sure the trigger is in the Off position when not
in use and before plugging in. Do not carry any tool with your finger on the
trigger, whether it is attached to an air source or not. Do not point the tool to-
wards yourself or anyone whether it contains fasteners or not.
13.
Stay alert.
Watch what you are doing, use common sense. Do not operate any
tool when you are tired.
14.
Check for damaged parts.
Before using any tool, any part that appears
