SPECIFICATIONS
SAVE THIS MANUAL
You will need the manual for the safety warnings and cautions, assembly instructions, operating
procedures, maintenance procedures, trouble shooting, parts list, and diagram. Keep your
invoice with this manual. Write the invoice number on the inside of the front cover. Keep both
this manual and your invoice in a safe, dry place for future reference.
SAFETY WARNING & CAUTIONS
WARNING: When using pneumatic equipment, basic safety precautions should always be
followed to reduce the risk of personal injury and hazards due to over pressurization.
READ ALL INSTRUCTIONS BEFORE USING THIS TOOL!
1.
KEEP WORK AREA CLEAN.
Cluttered areas invite injuries.
2.
OBSERVE WORK AREA CONDITIONS.
Do not use tools in damp, wet, or poorly lit loca-
tions. Don’t expose to rain. Keep work area well lit. Do not use electrically powered air com-
pressors in the presence of flammable gases or liquids.
3.
KEEP CHILDREN AWAY.
Children must never be allowed in the work area. Do not let them
handle machines, tools, or hoses.
4.
STORE IDLE EQUIPMENT.
When not in use, tools must be locked up in a dry location to
inhibit rust. Always lock up tools and keep out of reach of children.
5.
DO NOT FORCE THE TOOL.
It will do the job better and more safely at the rate for which it
was intended. Do not use inappropriate attachments in an attempt to exceed the tool’s capaci-
ties.
6.
USE THE RIGHT TOOL FOR THE JOB.
Do not attempt to force a small tool or attachment
to do the work of a larger industrial tool. Do not use a tool for a purpose for which it was not
intended.
7.
DRESS PROPERLY.
Do not wear loose clothing or jewelry as they can be caught in moving
parts. Non-skid footwear is recommended. Wear restrictive hair covering to contain long hair.
8.
USE EYE AND EAR PROTECTION.
Always wear ANSI approved chemical splash goggles
when working with chemicals. Always wear ANSI approved impact safety goggles at other
times. Wear a full face shield if you are producing metal filings or wood chips. Wear an ANSI
approved dust mask or respirator when working around metal, wood, and chemical dusts and
mists.
9.
DO NOT ABUSE THE POWER CORD.
Do not yank compressor’s cord to disconnect it from
the receptacle. Do not carry tools by the cord.
10.
DO NOT OVERREACH.
Keep proper footing and balance at all times. Do not reach over or
across running machines.
11.
MAINTAIN TOOLS WITH CARE.
Keep tools sharp and clean for better and safer perfor-
mance. Follow instructions for lubricating and changing accessories. Inspect compressor’s
cord periodically and, if damaged, have them repaired by an authorized technician. Inspect all
hoses for leaks prior to use. The handles must be kept clean, dry, and free from oil and grease
at all times.
Page #2 -- SKU: 35245
Free Speed
18,000 RPM
Air Pressure
90 PSI
Air Consumption
4 CFM
Weight
3-1/4 lbs.
Содержание 35245
Страница 11: ...Page 11 SKU 35245 ASSEMBLY DIAGRAM...
