Page 4
SKU 32966
for technical questions, please call 1-800-444-3353.
Maintain tools with care. keep the Rabbeting Jointer clean.
Properly main-
tained tools are less likely to malfunction and are easier to control. Do not use a
damaged tool. Tag damaged tools “Do not use” until repaired.
check for misalignment or binding of moving parts, breakage of parts, and any
other condition that may affect the tool’s operation. If damaged, have the tool
serviced before using.
Many accidents are caused by poorly maintained tools.
use only accessories that are recommended by the manufacturer for your
model.
Accessories that may be suitable for one tool may become hazardous
when used on another tool.
SeRVIce
prior to performing service, maintenance, or cleaning procedures, always
make sure the Rabbeting Jointer’s power Switch is in its “Off” position and
the power cord is disconnected from its electrical outlet.
Tool service must be performed only by qualified repair personnel.
Service or
maintenance performed by unqualified personnel could result in a risk of injury.
When servicing a tool, use only identical replacement parts. follow instruc-
tions in the
“Inspection, Maintenance, And Cleaning”
section of this manual.
Use of unauthorized parts or failure to follow maintenance instructions may create
a risk of injury.
SpecIfIc SAfeTy RuleS
Maintain labels and nameplates on the Rabbeting Jointer.
These carry im-
portant information. If unreadable or missing, contact Harbor Freight Tools for a
replacement.
Maintain a safe working environment.
Make sure there is adequate surrounding
workspace.
Avoid unintentional starting.
Make sure you are prepared to begin work before
turning on the Rabbeting Jointer.
Always check all four knife Set Screws (17) on each of the three knives (16)
for tightness prior to each use of the Rabbeting Jointer.
people with pacemakers should consult their physician(s) before use.
Elec-
tromagnetic fields in close proximity to a heart pacemaker could cause pacemaker
interference or pacemaker failure.
Never leave the Rabbeting Jointer unattended when it is running.
Turn off the
tool before leaving the work area.
Always feed the workpiece against the rotation of the knives (16).
5.
6.
7.
1.
2.
3.
1.
2.
3.
4.
5.
6.
7.
Brought To You By Augusta Flint
