Page 12
SKU 97816
For technical questions, please call 1-800-444-3353.
Route the Power Cord along a safe
5.
route to reach the work area without
creating a tripping hazard or expos-
ing the Power Cord to possible dam-
age.
ASSEMBLY INSTruCTIONS
CAuTION!
1.
Always make sure the
Power Switch (501) of the Table
Saw is in its “OFF” position and the
machine is unplugged from its elec-
trical outlet prior to assembling the
machine, adding any accessories, or
making adjustments to the machine.
Because of the weight of the Table
Saw, assembly should be performed
by at least two people.
To Install The Extension Wings
Attach the left Extension Wing (127)
1.
and right Extension Wing (127) to the
Table (126) using three Capscrews
(128), three Washers (129), and
three Flat Washers (130) for each
Extension Wing. Finger tighten only.
(See Figure E.)
Align the fronts of the left Extension
2.
Wing (127) and right Extenstion Wing
(127) with the top of the Table (126)
directly above the front Cap Screws
(128), and flush with the edge of the
Table. Then, firmly tighten the
Cap Screws.
(See Figure E.)
Align the rears of the left Extension
3.
Wing (127) and right Extensions
Wing (127) with the top of the Table
(126) directly above the rear
Cap Screws (128), and flush with
the edge of the Table. Then, firmly
tighten the Cap Screws.
(See Figure E.)
FIgurE E
CApSCrEWS (128)
ELASTIC WASHErS (129)
FLAT WASHErS (130)
To Install The Cleanout door and
dust Hood
Mount the Cleanout Door (118) into
1.
the square hole located on the lower
right side of the Cabinet (101). To do
so, use one Door Latch (119) and one
Knob (120).
(See Figure F, next page.)
Attach the Dust Port (124) to the Clea-
2.
nout Door (118), using four Flat Wash-
ers (121), four Elastic Washers (122),
and four Nuts (123).
(See Figure F, next page.)
Make sure to orient the Dust Port
3.
(124) so the 4” flange is on the lower
half of the Dust Port when installed.
(See Figure F, next page.)
NOTE: A dust collector (not included)
4.
may be attached to the Dust Port
(124), using a 4” diameter hose (not
included.)
