CentoLight ZEPHIRO FOG 900, Руководство пользователя

Страница: 6 / 28

6 6
Zephiro Fog 900 User Manual
Eng
1) Personal Safety
y
Always connect the product to a grounded circuit to avoid the risk of electric
shock. During heating up and operation, the housing will get hot: do not touch .
y
The product is very hot during operation and it remains hot for a long time after
operation has stopped. Do not touch the product’s nozzle.
y
Make sure that children, unauthorized people and animals do not have access
to the machine.
y
The operation noise is without harm to ear. No need to wear ear protection
when close to the working machine.
2) Mounting and Rigging
y
For safety reasons, it is not recommended to mount the product on suspended
structures. Operate the product while it is on the ground only.
y
The product is for both indoor and outdoor use but, in order to prevent risk of
fire or shock, do not expose the product to rain or moisture
CAUTION: When transferring product from extreme temperature environments,
(e.g. cold truck to warm humid ballroom) condensation may form on the inter-
nal electronics of the product. To avoid causing a failure, allow product to fully
acclimate to the surrounding environment before connecting it to power.
y
Do not use in a confined space. Always install the product in a location with
adequate ventilation, at least 20 in (50 cm) from adjacent surfaces.
y
Be sure that no ventilation slots on the product’s housing are blocked.
3) Power and Wiring
y
Always make sure that the voltage of the outlet to which you are connecting
the product is within the range stated in paragraph “8 - Specification” on page
13 or rear panel of the product (AC220V- 50/60Hz).
y
Make sure the power cord is not crimped or damaged. Never connect this prod-
uct to a dimmer pack or rheostat.
y
Never disconnect the product from power cord by pulling or tugging on the cord.
y
To eliminate unnecessary wear and improve its lifespan, during periods of non-
use completely disconnect the product from power via breaker or by unplugging
it.
y
To avoid electric shock, all fixtures must be connected to circuits with a suitable
ground.