CentoLight ZEPHIRO 600 SPARK, Руководство пользователя

Страница: 17 / 44

17 17
ZEPHIRO 600 SPARK User Manual
Eng
A
B
C
D
DIGITAL REMOTE
CONTROLLER
A Button : Stop
B Button : fast jet (10).
Press the button, and the Spark Machine will output spark
momentarily for as long as you hold down the button (no
more than 30 seconds). Red LED on top of A button will lit till
you do not release all buttons.
C button : slow jet. Same as B button, but jet is at lowest level
(1).
Spark Machine will output spark momentarily for as long as
you hold down the button (no more than 30 seconds). Red
LED will lit until you do not release all buttons.
D button : Cleaning routine.
Use this button when you want to completely empty the pow-
der consumable tank. Red LED will lit until you do not release
all buttons.
1) Remote Function Activation
If the remote control cannot work (red LED lits but machine does not operates),
please check whether wireless function is turn on.
Press MENU button till you reach “Remote” page. Then press UP or DOWN to
change current value to “ON”. Press ENTER to confirm; the display comes back to
main page.
Remote
OFF
Remote
ON
2) Battery Replacement
If the remote control cannot work (red LED does not lit and machine does not oper-
ates), please check whether battery is low and need to be replaced.
To change the battery, remove the cover on the back of the remote control and
replace the old battery with one of the same type (23A - 12V).
ATTENTION: Pay attention to respect the polarity. The two ends of the battery
have a “+” (positive pole) and a “-” (negative pole) respectively. These marks are
also present inside the battery compartment. Make sure the “+” of the battery is
towards the “+” indicated in the battery compartment.