CentoLight ZEPHIRO 600 SPARK, Руководство пользователя

Страница: 15 / 44

15 15
ZEPHIRO 600 SPARK User Manual
Eng
Once the initialization procedure is finished, the display shows latest DMX channel
in the first line, and the working temperature (from 32 to 592) in the second line.
DMX Address 1
32
7 - r
eadY
i
ndiCaTor
The green READY LED flashes until the temperature reaches 555.
At this point the machine is ready to go but the temperature is not enough to pro-
duce a fountain of bright and powerful sparks. It is strongly recommended to wait
for the HEAT LED to switch off as well. The risk is that the dust does not produce
sparks and, even if blown upwards, it will fall back as dust yet.
8 - H
eaT
i
ndiCaTor
The red HEAT LED is on until the temperature reaches 592.
The heating system switches off and slowly the machine cools down (especially if
used outside in winter); the temperature value on the display goes down to 578. At
this point the heating cycle starts again and the temperature goes up again to 592.
And so you go on for the entire time the machine is used.
DMX Address 1
592
DMX Address 1
578
DMX Address 1
578
DMX Address 1
592
9 - M
enu
o
peraTion
By pressing MENU button, the display will show the main function menu.
Page Name Range Function
Set DMX Address 1-511 It changes DMX address
Remote ON/OFF Wireless function switch
Manual Jet ON/OFF Manual spark jet emission (for testing only)
Jet Height 1-10 Manual jet height adjustment (for testing only)