CentoLight PORTRAIT Q-Air Set, Руководство пользователя

Страница: 27 / 60

27 27
PORTRAIT Q-AIR Set User Manual
Eng
Battery Connector detail
To replace the battery follow the steps below:
1. Remove the four screws shown in the following picture
Remove these two screws Remove these two screws Pull out the rear panel
2. Pull out the panel on fixture bottom.
3. You can now access to battery pack.
4. It the battery connector of the new pack does not correspond to the old one,
you need to cut it our and solder the poles to the original wires. Pay attention to
polarity: red wire is positive; black wire is negative.
WARNING: We suggest you to contact a Centolight authorized service center.
9.4. Battery Safety and Disposal Instructions
Please follow the instructions below for safe handling of and proper disposal of
user-serviceable batteries.