CentoLight PORTRAIT Q-Air Set, Руководство пользователя

Страница: 12 / 60

12 12
PORTRAIT Q-AIR Set User Manual
Eng
areas is forbidden. The operator has to make sure that the safety measure and the
machine’s technical installation is approved by an expert before taking into opera-
tion for the first time and after changes before taking into operation anther time. He
has also to make sure that an expert approves safety measure and the machine’s
technical installation once a years.
WARNING: The fixture should be installed outside areas where persons may
walk by or be seated.
IMPORTANT: Overhead rigging requires extensive experience, including (but not
limited to) calculating working load limits, installation material being used, and
periodic safety inspection of all installation material and the projector. If you
lack these qualifications, do not attempt the installation yourself, but instead
use a professional structural rigger. Improper installation can result in bodily
injury or property loss.
y
If the fixture must be raised to/or lowered from the ceiling or by suspended
beams, it is advisable to use professional trussing systems.
y
In case of installation on a wall, ceiling or truss, the use of safety rope such as
the LW3-76A or the LW4-76A (sold separately) and clamps such as the SLH/SQC
series is required (sold separately). Visit www.centolight.com for more details.
y
For overhead use, also consider that a safety rope must hold at least 10 times
the weight of the fixture. The fixture must never be left to swing freely.
CAUTION: Fixture may cause severe injuries when crashing down. If you have
doubts concerning the safety of a possible installation, do not install the fix -
ture!
CAUTION: Use two appropriate clamps to rig the fixture on the truss. Make sure
that the device is fixed properly! Ensure that the structure (truss) to which you
are attaching the fixtures is secure.
DANGER OF FIRE! When installing the device, make sure there is no highly in -
flammable material (decoration articles, etc.) within a distance of minimum 0.5
meter.