CentoLight PORTRAIT Q-Air Set, Руководство пользователя

Страница: 14 / 60

14 14
PORTRAIT Q-AIR Set User Manual
Eng
Signal amplifier is a must to connect more fixtures.
4.3. DMX Addressing
Each fixture must be assigned a DMX address so that the correct fixture responds
to the correct control signals. This DMX address is the channel number from which
the fixture starts to “listen” to the digital control information being sent out from the
controller.
The PORTRAIT Q-AIR has 2 DMX channel modes: 6 and 8 DMX channels. To set up
fixture DMX address, first select DMX channel mode by following up the paragraph
“9.1. DMX Control Mode” on page 17. The highest DMX address for this fixture is
512. To set up fixture DMX starting address, follow the steps below:
y
Press “Up” or “Down” button to set up DMX address;
y
Press “Enter” to save your setting.
4.4. 3-Pin vs 5-Pin DMX cables
DMX connection protocols used by controllers and fixtures manufacturers are not
standardized around the world. However, two are the most common standards:
5-Pin XLR and 3-Pin XLR system. If you wish to connect this fixture to a 5-Pin XLR in-
put fixture, you need to use an adapter-cable or make it by yourself. Below you can
see the wiring correspondence between 3-Pin and 5-Pin plug and socket standards
5-Pins XLR (plug)
Pin 1: GND (Screen)
Pin 2: Signal (-)
Pin 3: Signal (+)
Pin 4: N/C
Pin 5: N/C
3-Pins XLR (socket)
Pin 1: GND (Screen)
Pin 2: Signal (-)
Pin 3: Signal (+)
5-Pins XLR (socket)
Pin 1: GND (Screen)
Pin 2: Signal (-)
Pin 3: Signal (+)
Pin 4: N/C
Pin 5: N/C
3-Pins XLR (plug)
Pin 1: GND (Screen)
Pin 2: Signal (-)
Pin 3: Signal (+)
5 - W
Ireless
dMX C
onTrol
Your PORTRAIT Q-AIR Par can be remotely controlled by DMX-512 wireless trans-
ceivers like the SOUNDSATION AIRCOM 126 (check www.soundsationmusic.com or
contact your SOUNDSATION local dealer for further information).
The fixture is equipped with a 2.4GHz wireless DMX512 interface that works within
2,400-2,525 GHz license-free band. Maximum distance is 300m (without obstacles).
This wireless feature, considering that the PORTRAIT Q-AIR is a battery-powered
fixture, gets rid of relying on connecting cables completely, and also can ensure a
reliable and very-low delay DMX data communication. It adopts global free 2.4GHz
ISM frequency band and high effective GFSK modulation.