CentoLight Mood 1818WP, Руководство пользователя

Страница: 14 / 32

14 14
MOOD 1818WP User Manual
Eng
9 - T
roubleshooTing
Problem Probable Cause(s) Remedy
No response from fixture when
power is applies
No power to fixture
Check power cables
Check mains plug
Fixture does not reset correctly Electronic failure Contact service technician*
No light, LED cuts out intermit-
tently, or burns out too quickly
LED missing or blown
Disconnect fixture and contact ser-
vice technician* fo LED replacement
Fixture or LED is too hot
Allow fixture to cool. If problem per-
sists, contact service technician*
Fixture resets but does not
respond correctly to controller
(DMX mode operation)
Controller not connected Connect controller
Incorrect addressing of the
fixtures
Check address setting on fixture and
controller
Bad data link connection
Inspect cables and correct poor con-
nections and/or broken cables.
Conflict between tracking and
vector control
Eliminate scene cross-fade on
controller
Data link not terminated
Insert termination plug in output of
last fixture**
Defective fixture or 2 devices
transmitting on link
Bypass fixtures one at a time until
normal operation is regained: un-
plug both connectors and connect
them directly together
* To contact CentoLight service, see “11 - Warranty And Service” on page 15 or visit www.centolight.com
** For instruction on how to install a DMX terminator, see “6.5. DMX Terminator” on page 10.
10 - s
PeCifiCaTion
Light source 18 x 18W RGBWA+V 6in1 LED
Beam angle 40°
Lux @ 1m
R 2500 Lux, G 6600 Lux, B 1170 Lux, W8650 Lux, A 2900 Lux, V 50 Lux,
RGBWA+V 21000 Lux
CRI ≥75
DMX Channel Modes 6CH, 10CH-1, 10CH-2
Cooling System Convection (No Fan)
Power Supply Type Switching (internal)
Mains 100-240V - 50/60Hz
Consumption 340W
Light Size (LxDxH) 260x310x250 mm - 10.24x12.21x9.84 in (bracket installed)
Light Weight 4 kg - 8.82 lbs.
Packing Size (LxDxH) 290x290x340 mm - 11.42x11.42x13.38 in
Packing Weight 4.5 kg - 9.92 lbs.
Note: Our products are subject to a process of continual further development. Therefore modifications to the technical
features remain subject to change without further notice.