Page 3
For technical questions, please call 1-888-866-5797.
Item 66967
Installation Precautions
1.
DO NOT INSTALL THIS INVERTER
INTO A BUILDING’S ELECTRICAL
SYSTEM. This inverter is a vehicular
accessory. It is not designed to be
safely used in a building’s electrical
system and has not been evaluated
to meet building wiring codes.
Improper application may create
a fire or electric shock hazard.
2. To allow proper cooling, install in indoor
well-ventilated area and do not cover
ventilation openings or cooling fins.
Do not install in engine compartment.
Especially avoid placing the Inverter
on carpets and rugs; they are
not only flammable, but they also
obstruct vents underneath it.
3. Keep combustible materials and
gasses away from the inverter.
The inverter produces sparks and heat
during operation and can start a fire.
4. Connect to 12 VDC power supply only.
A power supply with lower voltage will
not operate the Inverter correctly, and
higher voltage could damage the unit.
5. Connect input polarity properly.
Incorrect connection will damage
inverter and void warranty.
6.
Do not use in a marine application.
This inverter is not intended to withstand
the highly corrosive conditions in
marine applications and would quickly
be rendered inoperable or unsafe.
7. Keep inverter dry and clean.
Do not expose to rain, snow,
spray, bilge water or dust.
8. Install as close to DC source as
possible, but not in a closed area
with vented lead-acid batteries.
Vented lead-acid batteries release
explosive hydrogen gas that can
be ignited by the inverter.
9. Mount inverter horizontally.
10. Verify that installation surface
has no hidden utility lines before
drilling or driving screws.
11. This product is not a toy.
Keep it away from children.
12. Do not use with positive
ground electrical systems.
(Most automobiles, trucks, and RV’s
have negative ground systems.)
13. The positive (+) battery on the Inverter
must be the last connection made,
and must be connected before the
Inverter is turned on. There may
be a small spark during the final
connection. This is normal.
14. Properly ground the inverter’s case
as explained in this manual.
