Page 7
For technical questions, please call 1-888-866-5797.
Item 66967
Installation
Read the ENTIRE IMPORTANT SAFETY INFORMATION section at the
beginning of this manual including all text under subheadings therein
before set up or use of this product.
CAUTION!
This Inverter must only be connected to batteries with an output
voltage of 12 volts DC. Lower voltage will not operate the Inverter properly,
and more voltage could damage the Inverter or the device being powered.
Do not use this Inverter with positive ground electrical systems.
The Inverter is configured to have a number of shut-down points,
for the safety of the operator, the unit, and the devices being used with it.
• If the DC input voltage drops too low,
the alarm on the Inverter will sound.
Should the input voltage drop further,
the Inverter will shut down automatically
to prevent permanent battery damage.
Recharge the battery soon.
• If the DC input voltage exceeds 15.2V
the Inverter will shut down automatically.
• If the output load power rises higher
than the rating power of the Inverter;
the unit may shut down automatically.
• The Inverter may automatically
shut down if its internal
temperature gets too high.
Note:
Even though this inverter has built-in mechanisms to minimize damage,
the above situations should be avoided because they can still
damage the inverter, battery, and/or attached device(s).
Functions
AC Outlets
USB Outlet
Power Button
Alligator
Clips
Power LED
Fault LED
Power Terminal
- 1 of 2
