background image

Page 4

For technical questions, please call 1-888-866-5797.

Item 66967

Battery Precautions

1. 

Wear splash-resistant 

ANSI-approved safety goggles 

and electrically insulated gloves 

while working near batteries.

2.  Charge, store, and maintain batteries 

according to supplier’s instructions.

3.  Locate batteries in a clean, 

well-ventilated area, away from ignition 

sources and flammable materials.  

Vented lead-acid batteries release 

explosive hydrogen gas while charging.

4.  Only connect similar batteries together.  

Do not connect old and new batteries 

together, wet and gel cells together, or 

batteries of different capacities together.

5. 

Use only 12 V batteries with this item. 

6. 

Connect batteries in parallel ONLY 

(negative terminals together to 

one cable; positive terminals 

together to the other cable).

7. 

Install a properly rated fuse on the 

positive output of the battery bank.

Operation Precautions

1.  Multiple outlet power strips with switches 

and circuit breakers only interrupt 

power to the “hot” receptacle terminals. 

The “neutral” terminals remain powered 

with respect to the “ground” terminals.  

So strip switch may be off, but part 

of appliance may still be powered.

2.  Inspect supply connections before 

use to ensure they are tight and 

that insulation is not damaged.

3.  Do not use this inverter to power 

sensitive devices such as medical 

devices or computers. However, it may 

be used to charge a computer battery.   

Do not use in ignition protected areas.

4.  Some rechargeable tools and 

appliances can damage the Inverter.  

Check the temperature of the device 

several times when it is charging.  

If the device becomes extremely hot; 

turn the power off, remove the device, 

and do not use with the Inverter again.

5.  Check for breakage of parts and any 

other condition that may affect the 

Inverter’s operation.  If damaged, 

have it repaired before use.

6.  Do not attempt to power a device, 

or combination of devices, that will 

require more than the rated output of 

this inverter.  This may damage the 

inverter or the attached devices.

7.  Appliances such as microwave 

ovens will normally draw 

more than their rated current. 

For example:  A typical 

600 watt microwave oven will draw 

approximately 1,000 watts.

8.  Do not attach a battery charger if 

the charger carries a warning that 

dangerous voltages are present 

at the battery terminals.

9.  Some fluorescent lamps may not 

operate properly with this type of 

inverter. If the bulb appears to be 

too bright, or fails to light, do not 

use the lamp with this inverter.

10.  Some fans with synchronous motors 

may slightly increase in speed when 

powered by the inverter. This is not 

harmful to the fan or to the inverter.

11.  Inverter will consume some power 

while on, even without loads attached.  

Turn inverter off after use.

Содержание 200 watt continuous













Отзывы: