4
Use of consumable materials
ENGLISH
Fig. 14 Examples of label sensor setting
(*) Some versions of cable markers KM-ROLL are equipped with a transversal black line mark instead of the usual lateral
perforation mark, in which case, position the label sensor centrally on a mark.
Figures 13 and 14 show examples of correct positioning of the label sensor depending on the media being printed.
4.1.4 Setting the print head locking system
!
Attention
Usually no adjustment is required, so proceed with caution as incorrect setting may move the print head from
its optimum position, reducing print quality and possibly damaging the printer.
The print head is moved via two plungers (1). In the basic setting the plungers are set in the middle of the print head
retainer this setting is appropriate for most applications.
If the print density decreases in the outer areas of very large labels, the plungers can be adjusted:
• Turn lever (3) clockwise to lock the print head.
• Loosen threaded pins (2) at the plungers (1) with Allen key.
• Adjust plungers symmetrically, do not exceed a scale value of 70.
• Tighten the threaded pins (2).
Fig. 15
Setting the print head locking system
4.1.2 Posizionamento del materiale nella testa di stampa
Figura 10 Percorso del materiale
Figura 11 Inserimento del materiale nella testa di stampa
1. Ruotare la leva (12) in senso antiorario per sollevare la testa di stampa.
2. Allontanare le guide (8) ruotando il pulsante (11) fino a quando ci entra il materiale.
3. Spingere il materiale facendolo passare sotto l’asse di guida (7) tra le guide (8).
4. Inserire la striscia di materiale sotto il sensore (9) in modo tale da passare tra la testa di stampa (10 /Figura 2) e
l’asse di guida (11 / Figura 2) per fuoriuscire frontalmente.
5. Avvicinare le guide (8) ai bordi del materiale.
4
Caricamento del materiale
ITALIANO
9
14
8
8
11
12
7
37
14
LABEL SENSOR
POSITION
LABEL SENSOR
POSITION
LABEL SENSOR
POSITION
TTL...
KM-ROLL... (*)
CONTINUOUS
TERMO-ROLL...
LABEL SENSOR
POSITION
TERMO-ROLL...
LABEL SENSOR
POSITION
TTF...
LABEL SENSOR
POSITION
TTL...
3
2
1
