5
TDB 6
TDB 3
3.1) DBG-F2 device (*)
with moving arm for clamping the drill to the
rail web and track fittings, complete with the following end pieces:
– TDB 1:
for switch blades and compound frogs.
– TDB 3:
for repairing (adjusting) existing holes on rails for subse-
quent application of electrical connections and for additional
special applications.
–
TDB 6:
standard end piece for rails and stock rails.
(*) Supplied with drilling machine ref. LD-1P-ECO
3.2) “VAL P24” plastic carrying case
for storing the drill complete with the DBG-F2 device and
accessories.
Also available
VAL P24-CS plastic carrying case
with folding handle and wheels.
3.2.1) “VAL LD-L” metal case
for storing the drill complete with the DBG-LF2 device, and
VAL MPA tool case.
3.2) DBG-LF2 device
with moving arm complete
with
TDB 7
end piece for clamping the drill to
girder rails and for additional special applica-
tions.
3.3) DBSN device
for clamping the drill to flange
rails, for use in conjunction with the MPAF tem-
plates.
Using this device the rail drill can remain
clamped in the drilling position even when trains
pass over it.
TDB 1
TDB 6
TDB 3
TDB 7
VAL LD-L
VAL P24-CS
3. ACCESSORIES TO BE ORDERED SEPARATELY