3
LD-1PN-ECO
2-stroke, horizontal shaft, single cylinder
KAWASAKI TJ45E
45,4 cm
3
1,4 kW (1,9 HP) / 7500 rpm
0,9 litres
centrifugal with automatic intervention
by rope pull
solid state ignition (none breaker)
NGK BPMR7A or equivalents
2% (1:50) oil/petrol mixture (see § 8)
470 g/kW.hr / 350 g/hp.hr
according to "Phase 2"
European Directives 97/68/EC, 2001/63/EC and 2002/88/EC
Drilling capacity (
*
):
Speed without load:
Weight:
Weight with DBG-F2:
Gear sump
Recommended oil:
Ø 7 ÷ 40 mm
270 rpm
(
*
)
with br
oach cutt
ers on thick
nesses up t
o 50 mm
with special spir
al bits on thick
nesses up t
o 45 mm
Acoustic Noise (Directive 2006/42/EC, annexe 1, point 1.7.4.2 letter u)
– The weighted continuous acoustic pressure level equivalent
A at the work place L
pA
is equal to ........................................................................................99,5 dB (A)
– The maximum value of the weighted acoustic displacement
pressure C at the work place L
pCPeak
is equal to ...............................................................116,3 dB (C)
– The acoustic power level emitted by the machine
L
WA
is equal to .............................................................................................................................107,6 dB (A)
Risks due to vibration (Directive 2006/42/EC, annexe 1, point 2.2.1.1)
Tests carried out in compliance with the indications contained in UNI ENV 25349 and UNI EN
28662 part 1
st
Standards and under operating conditions much more severe than those nor-
mally found, certify that
the weighted root mean square in frequency of the acceleration
the upper limbs are exposed is 4,36 m/sec
2
max.
1. GENERAL CHARACTERISTICS
15,7 kg
18,9 kg
SHELL SPIRAX S4 TXM or
MOBIL SUPERMULTIGRADE 10-30-SAE or equivalents
Combustion engine:
Type:
Model:
Displacement:
Power (SAE J1349):
Fuel tank capacity:
Clutch:
Start:
Ignition:
Spark plug:
Fuel:
Fuel consumption:
Emissions: