3
HYDRAULIC CUTTING TOOL
HT-TC0851
1. GENERAL CHARACTERISTICS
– Application range:
is suitable for cutting copper, aluminium or telephone cables having a max.
diameter of .................................................................................. 85 mm
(3 - 3/8 in.)
– Rated operating pressure:
........................................................................................... 700 bar
(10,000 psi)
– Dimensions:
length ......................................................................................................... 652,5 mm (25.7 in.)
width .......................................................................................................... 175 mm
(5.6 in.)
– Weight:
................................................................................................................................. 6,6 kg
(14.5 lbs)
– Oil:
..............................................................................................
ENI ARNICA ISO 32
or
SHELL TELLUS OIL TX 32
or equivalent
– Operating positions
. The three operating positions are identifi ed on the main handle, (04), which
rotates relative to the reference symbol (see Fig. 1).
Rest position
(Handles locked): lock handles together when tool is
not in use.
Release
position
: close the moveable handle (59) against the main
handle (04), in order to discharge the oil pressure and retract the
lower
blade.
Operating
position
: operate the moveable handle (59), to build up
pressure and close the lower blade.
–
Advancing speed
. The tool auomatically switches from a fast advancing speed of blades to a
slower cutting speed.
–
Safety
. The tool is provided with max pressure valve; MPC1 special manometer, is available upon
request to check the proper setting of the valve.
2. RETURN TO
Cembre
FOR OVERHAUL
In the case of a breakdown contact our Area Agent who will advise you on the problem and give
you the necessary instructions on how to dispatch the tool to our nearest service Centre; if possible,
attach a copy of the Test Certifi cate supplied by
Cembre
together with the tool or fi ll in and attach
the form available in the “ASSISTANCE” section of the
Cembre
website.
ENGLISH
