3
HYDRAULIC CUTTING TOOL
HT-TC041N
1. GENERAL CHARACTERISTICS
– Application range:
suitable for cutting steel ropes and conductors with max. overall diameter
of 45 mm (1-25/32"), as indicated in §
7
.
– Rated operating pressure:
..........................................................................................700 bar (10,000 psi)
– Dimensions:
length ........................................................................................................552 mm (21.7 in.)
width .........................................................................................................144 mm (5.6 in.)
– Weight:
................................................................................................................................5,8 kg
(12.8 lbs)
– Oil:
...............................................................................
AGIP ARNICA HI 32
or
SHELL TELLUS OIL TX 32
or equivalent
– Operating positions:
the three operating positions are identified on the main handle (04), which
rotates relative to the reference symbol (see Fig. 1).
Rest position
(Handles locked): lock handles together when tool is
not in use.
Release position
: close the moveable handle (52) against the main
handle (04), in order to discharge the oil pressure and retract the lower
blade.
Operating position
: operate the moveable handle (52), to build up
pressure and close the lower blade.
–
Advancing speed
. The tool automatically switches from a fast advancing speed of blades to a
slower cutting speed.
–
Safety
. The tool is provided with max pressure valve; MPC1 special manometer, is available upon
request to check the proper setting of the valve.
ENGLISH
• Wear eye protection. Metal chips can fly from blades when cutting.
• Do not cut short, unsecured pieces of steel rod or rope as they may fly off dangerously, causing
injury to the operator or persons nearby.
• Inspect the blades before each use. Do not use damaged blades.
• Damaged blades can break and cause injury or damage to the tool.
• Work in a clean, uncluttered area. Keep persons away from immediate work area.
• Use this cutting tool for the manufacturer’s intended purpose only.
• Do not cut live cables or conductors.
WARNING
