Cembre B70M-P36, Руководство по эксплуатации и обслуживанию

Страница: 11 / 84

11
ENGLISH
5 BUTTON TO OPEN THE BATTERY COMPARTMENT
6 BATTERY COMPARTMENT COVER
7 MECHANICAL PRESSURE RELEASE
8 BRIGHT CEMBRE LOGO, switches on automatically when the operating button is pressed, and
off after 5 minutes of non-operation. It allows the operator to have a visual feedback on the
pump status. It can fl ash or produce a fi xed light with various colours depending on the mes-
sage emitted. The following table summarises the possible cases that can be found:
Lighting Meaning Note
steady
BLUE
Pump powered and in stand-by
mode, ready to use. Stays on until the "sleep" function is ac-
tivated. After 5 minutes of inactivity the
pump switches off automatically.
pulsating
BLUE
Motor running and work cycle
in progress. Flashes during the entire work cycle.
steady
GREEN
Correct completion of the
CRIMPING cycle carried out.
Lights up at the end of the cycle together
with the "
OK " message on the display.
fl ashing
RED
Incorrect completion of the
CRIMPING cycle carried out.
Lights up together with the " ERROR " mes-
sage on the display and an intermittent
audible alarm (see § 4.6 for further
details).
steady
ORANGE
Scheduled maintenance re-
quired. Stays on until the "sleep" function is acti-
vated. It reappears each time the pump is
switched on until the scheduled mainte-
nance has been carried out and the cycles
have been simultaneously reset to zero.
pulsating
ORANGE
Motor running and work cycle
in progress, scheduled mainte-
nance required. Flashes during the entire work cycle.
fl ashing
YELLOW
Fault in progress. Stays on until the anomaly has been
resolved, together with an indication on
the display and an audible alarm (see §
4.6 and 4.7 for further details).
9 QUICK COUPLING (automatic locking, fi tted with a fast-acting safety ring nut to eliminate
any risk of accidental disconnection)
10 CONNECTOR with cap, suitable to connect the remote controller.