ENGLISH
This hydraulic tool is powered by a 14.4V battery.
The tool is quiet in operation with minimal vibration, balanced for optimum control, with
lightweight construction enabling it to be held in one hand while positioning the connector
with the other.
The residual battery capacity level is automatically displayed after every cycle.
BATTERY OPERATED HYDRAULIC CRIMPING TOOL
B62
1. GENERAL CHARACTERISTICS
3
32
suitable for installing electrical compression connectors
for conductors up to 240 mm
2
(500 MCM)
60 (7)
600 (8,700)
340 x 94 x 302 (13.4 x 3.7 x 11.9)
4,6 (10.1)
14.4
AGIP ARNICA 32 or SHELL TELLUS TX 32 or equivalent.
the tool has a twin speed operation and automatically
switches from a rapid advancing speed of the ram
to a slower more powerful crimping speed.
the tool is equipped with a maximum pressure valve.
-15°C to + 40°C (+5°F to +104°F)
Application range:
Crimping force
kN (sh ton):
Rated operating pressure bar (psi):
Dimensions LxWxH mm
(inches):
Weight with battery
kg (lbs):
Motor Volt
DC:
Battery
Volt / Ah:
Battery charger supply
Volt / Hz:
Recommended oil:
Operating speed:
Safety:
Operating temperature:
Acoustic Noise (Directive 2006/42/EC, annexe 1, point 1.7.4.2 letter u)
– The weighted continuous acoustic pressure level equivalent
A at the work place L
pA
is equal to ................................................................................ 75 dB (A)
– The maximum value of the weighted acoustic displacement
pressure C at the work place L
pCPeak
is .....................................................................< 130 dB (C)
– The acoustic power level emitted by the machine
L
WA
is equal to ............................................................................................................ 85,3 dB (A)
Risks due to vibration (Directive 2006/42/EC, annexe 1, point 2.2.1.1)
Tests carried out in compliance with the indications contained in UNI ENV 25349 and UNI EN 28662
part 1
st
Standards, and under operating conditions much more severe than those normally found,
certify that the weighted root mean square in frequency of the acceleration the upper limbs
are exposed to for each biodynamic reference axis does not exceed 2.5 m/sec
2
.
TOOL TYPE:
B62
204
203
60
17
70
18
70
18
70
18
70
18
72
53
72
53
21
11
23
20
53
72
53
72
26
47
29
47
71
32
67
57
58
59
68
69
76
73
14
80
59
58
57
60
64
202
16
13
05
15
22
19
23
EXP1217 Rev. 0 27-04-2006
14.4 / 3.0 Li-Ion
220 - 240 / 50 - 60
