CEMB DWA1100, Руководство по эксплуатации и обслуживанию, Страница: 24 / 62

22
1
2
5
4
1
2
3
4
3
►
5.3 - Loads
To access this page, press

from the Vehicle Specifications page.
The Loads page allows viewing the loads to be positioned in the vehicle and the amount of fuel there needs
to be in the tank as specified by the manufacturer.
1. Vehicle
2. Percentage fuel in the tank
3. Loads to be positioned on the seats (kg)
4. Loads to be positioned in the luggage compartment (kg)
With reference to the figure check as far as possible the percentage fuel in the tank and if loads need to be
positioned in the passenger and luggage compartments of the vehicle being measured.

: goes back to the Vehicle Specifications page
►
5.4 - Vehicle customisation
To access this page, press
´
then

from the Vehicle Specifications page
The Vehicle Customisation page allows adding vehicles to the vehicle database.
To do this, first select a vehicle on the Vehicle Selection page and then access this page to modify the model
and the specifications. Of course, starting from a vehicle with similar specifications to the one to be added
will simplify the job.
On this page you cannot change the vehicle manufacturer, which must therefore be selected first. You cannot
add vehicles whose manufacturer is not already in the list of manufacturers on the Vehicle Selection page.
There is however a generic manufacturer name called 'Extra' at the end of the list where these vehicles can
be added. You cannot add ride height data nor adjustment help images.