CEMB DWA1100, Руководство по эксплуатации и обслуживанию, Страница: 23 / 62

21
1
2a
3
2c
3
2b
►
5.2 - Ride height
To access this page, press

from the Vehicle Specifications page
The Ride Height page allows:
• Viewing which measurements on the vehicle are required by the manufacturer (ride height or inclination
of parts of the suspension) and if necessary enter the results.
• Viewing which measurements to check on the vehicle before making the measurement and the adjustment
(e.g. chassis height or component tightening torque)
• Viewing which special tools to apply (e.g. toe-in bar)
1. Vehicle
2. Images of the measurements to be made on the vehicle or the tools to be applied.
Examples:
a. Position the toe-in bar
b. Measurements with rule
c. Measurements with inclinometer
3. Tables
Once the tools have been applied and the measurements made, consult the tables.
• If they indicate that you need to check that the measurement is within a certain tolerance interval and
this is not the case, act on the vehicle adjustments to bring the measurements within tolerance.
• If they indicate that you need to enter the measurement made, select the row from the corresponding
table. The vehicle specifications are modified as a result.
You are advised to follow the manufacturer's indications; if it is required to set the
measurement and this is not done, average values are used for the specifications.

/
¨
+

: selects one of the two tables
/ : selects the value of the measurement made on the vehicle (used only for
tables that indicate that the modification selected must be entered)

: goes ba ck to the Vehicle Specifications page, if necessary changing the values of
the vehicle angles based on the measurements made