19
Non-Contact Forehead InfraRed Thermometer
14.EMC Statement
• This device has been tested and homologated in
accordance with EN60601-1-2 for EMC.
• This does not guarantee in any way that the device will
not be affected by electromagnetic interference, avoid
using the device in high electromagnetic environment.
• The medical delectrical equipment needs special
precautions egarding EMC and needs to be installed
and put into service according to the EMC information
provided in the accompanying documents.
• Portable and mobile RF communications equipment
can affect medical eelectrical equipment.
Table 201-Declaration-Electromagnetic Emissions
Compliance
Group 2
Class B
Not
applicable
Not
applicable
Guidance and Manufacturer’s Declaration-Electromagnetic
Emissions
The DT-8807H is intended for use in the electromagnetic environment
specified below.
The customer or the user of the DT-8807H should assure that it is
used in such an environment.
Emissions
Test
RF emissions
CISPR 11
RF emissions
CISPR11
Harmonic
emissions
lEC 61000-3-2
Voltage
fluctuations/
flicker
emissions
lEC 61000-3-3
Electromagnetic Environment-
Guidance
The DT-8807H must emit
electromagnetic energy in order to
perform its Intended function.
Nearby electronic equipment may be
affected.
The DT-8807H Is suitable for use in all
establishments other than domestic
and those directly connected to the
public low-voltage power supply
network that supplies buildings used
for domestic purposes.