CEM DT-613, Руководство по эксплуатации

Страница: 9 / 12

8
Displaying Temperatures
1. Press to select the correct temperature scale.
2. Hold or attach the thermocouple(s) to the measurement
location. The temperature reading appears in the primary
display.
3. Press to toggle between showing the T1, T2, and
T1-T2, and readings in the primary or secondary display.
Notes
The display shows "- - - -" when a thermocouple is not
connected.
The display shows OL (overload) when the temperature
being measured is outside the thermocouple’s valid range.
Holding the Displayed Readings
1. Press to freeze the readings on the display .The
display shows HOLD .
2. Press to toggle showing the T1, T2, T1-T2,
readings in the primary or secondary display.
3. Press again to turn off the HOLD function.