CEM DT-613, Руководство по эксплуатации

Страница: 7 / 12

6
Using the IR (Infrared Ray)
1. Plug the output into the T2 (IR input) connector(s)
“
T2 - - - -
” will show on screen. If the is not connected,
“
T2 - - - -
” is not show on the screen.
2. Press the
“SCAN”
button ,the temperature will show on
the screen.
Changing Setup Options
Use Setup to change offset, sleep mode settings. The
thermometer stores the settings in its memory.
Setup Options
Entering or Exiting Setup
When the thermometer is in Setup mode, the display shows
SETUP.
Press button for 3 seconds start or exit Setup.
Option Menu item Settins
Offset offset T1 or T2
Sleep Mode SLP
On (sleep mode on)or
0FF (sleep modeoff)